Janome 9700 manual Threading the Machine

4

1 2

3

2

6

7

6

2

5

1

4

1

3

5

Threading the Machine

Raise the Presser Foot Lifter. Press the Up/Down Needle Button twice to raise the needle to its highest position.

Turn the Power Switch OFF.

1Hold the upper thread with both hands as shown and place it down into the Slit.

2Draw the thread around the Thread Guide following the dashed line as shown in the diagram.

3Then draw the thread down along the right channel and around the bottom of the Thread Guide Plate.

1Right Channel

4Firmly draw the thread up along the left channel to the Take-up Lever and down into its eye from the right to the left.

2Left Channel

5Then pull the thread down along the left channel and through the Lower Thread Guide.

6	Slide the thread behind the Needle Bar Thread
	Guide on the left.
7	Thread the needle from front to back by hand or
	using the Built-in Needle Threader.

7

15