1
1
2
2
(A)
3(B)
4
(B)
3
5
14
Inserting the Bobbin
1Place the Bobbin in the Bobbin Holder with the Thread running off counterclockwise.
1Thread
2Bobbin Holder
2Guide the thread into the Front Notch (A) on the front of the Bobbin Holder.
3Draw the thread to the left, sliding it between the tension spring blades.
4Continue to draw the thread lightly until the thread slips into the Side Notch (B).
5Pull out about 10 cm (4") of thread to the rear.
NOTE:
A Threading Chart is shown on the Hook Cover Plate for your reference.
Reattach the Hook Cover Plate.
3 Threading Chart
