Sensor BH |
|
| 3 | Auto |
| |
Pull down BH Lever. |
| R |
| |||
|
|
| ||||
13 | 14 | 15 | 16 | 17 | 18 |
|
Sensor | Auto |
|
|
|
|
|
19 | 20 | 21 | 22 | 23 | 24 |
|
|
|
|
|
|
| SET |
|
|
|
|
| Adjust | A Z |
Corded buttonhole
To sew the corded buttonhole, follow the same procedure as for the Sensor Buttonhole; refer to the instructions on pages 43 to 45.
Select the pattern 13.
With the Automatic Buttonhole Foot R raised, hook the filler cord on the Spur on the back of the buttonhole foot.
Bring the ends of cord toward you under the buttonhole foot clearing the front end.
1 | 2 |
Hook the ends of the filler cord into the Forks on the front of the Automatic Buttonhole Foot R, to hold them tight.
1 | Spur |
2 | Forks |
Lower the needle into the garment where the buttonhole will start and lower the foot.
Press the Start/Stop Button and sew the buttonhole. Each side of the buttonhole and the bartacks will be sewn over the cord. The machine stops automatically when finished.
Remove the fabric from the machine and cut the sewing threads only.
Pull the left end of the filler cord to tighten it.
Thread the end of the cord through a darning needle and draw it to the wrong side of the fabric and cut.
NOTES:
Set the stitch width in accordance with the thickness of the cord used.
To cut the buttonhole opening, refer to the instructions on page 45.
46
