INSTALLING THE BUTTON-TYPE BATTERY

Installing the button-type battery in the remote control

1.Turn the battery holder counterclockwise (as indicated with () mark) using your fingernail or a coin to open it. The battery holder opens.

2.Insert the battery into the battery holder with the positive (+) terminal facing down and press it firmly until you hear a locking sound.

3.Place the battery holder back in the remote control, matching its () mark with the () mark on the remote control, and turn the battery holder clockwise to lock it.

Precautions regarding the button type battery

•There is a danger of explosion if button type battery is incorrectly replaced. Replace only with the same or equivalent type.

•Do not pick up the battery using tweezers or other metal tools. This will cause a short circuit.

•Do not recharge, disassemble, heat or immerse the battery in water to avoid the risk of explosion.

Keep the button type battery out of the reach of the children. Should WARNING any battery be swallowed, consult a doctor immediately.

1

2

Battery holder

3

English _15