English _105
USING THE VOICE PLUS
This function is available in DISC Play mode. page 26
This function enables you to narrate over a pre-recorded disc via the DVD
camcorder’s microphone.
When you want to copy a DVD onto other AV devices (DVD recorder, VCR),
you can dub your voice sound incoming from the internal microphone of
your DVD camcorder to an AV device, instead of copying the audio signals
on a pre-recorded disc.
1. Connect the DVD camcorder to your AV device with AV cable.
2. Set the Storage mode switch to DISC. (VP-DX205(i)/DX2050/DX210(i)
only) page 38
3. Insert the disc you wish to play back in this DVD camcorder.
4. Press the MODE button to set the Play ( )
mode
.
5. Press the MENU button and use the Joystick to set the desired “Play Mode” on the
menu. page 45
6. Use the Joystick to select the desired image.
7. Press the Recording start/stop button on a point where you want during the playback.
Voice Plus icon ( ) is displayed and “Voice +” will blink for a while.
Sound signals incoming from the internal microphone will be dubbed to a connected
AV device, instead of copying the pre-recorded sound on a disc.
8. To cancel, press the Recording start/stop button again.
Voice Plus is available only when the AV cable is connected. If a USB cable is connected, the Voice Plus function may not operate
properly. (VP-DX205(i)/DX2050/DX210(i) only)
If you perform Stop, Play/Pause, REW, or FF while the Voice Plus function is being executed, the Voice Plus function will be
deactivated.
When the Voice Plus function is in progress, the MENU button or PHOTO button does not work.
The Voice Plus function does not affect the original sound on the recorded disc.
Sound is transferred from the internal microphone on this DVD camcorder to the connected AV device, when using the Voice Plus
function. Make sure the microphone is not covered or blocked in any way.
Adjust the sound volume on the connected external device. (TV, audio system etc.)
Feedback may occur if the DVD camcorder is placed near the speaker of an external device.
Turn down the volume of the external device and keep the DVD camcorder a reasonable distance away.
Make sure to set “AV In/Out” to “Out” before connecting to an external device. (VP-DX200i/DX205i/DX210i only)
TV
Signal fl ow
AV cable
DVD camcorder
00:00:59/00:02:30
Voice +
003
3/12003
Play Move Playlist