64_ English
RECORDING VIDEOS ONTO A MEMORY CARD ( )• This function is available in CARD Video Record mode. page 26
• You can record videos using the remote control. page 18
• This DVD camcorder provides two Recording start/stop buttons. One is on the rear
side of the camcorder and the other is on the LCD panel. Select the Recording start/
stop button that works best for you.
1. Turn the DVD camcorder on.
• Connect a power source to the DVD camcorder.
(A battery pack or an AC power adaptor)
• Slide the POWER switch downwards to turn the DVD camcorder on.
• Set the Storage mode switch to CARD. page 38
2. Check the subject on the LCD screen. (Lens and LCD)
• Set the Lens open/close switch to open ( ). page 15
3. Press the Recording start/stop button.
• The (●) recording indicator will display, and recording will start.
• Press the Recording start/stop button again to stop recording.
4. When recording is finished, turn the DVD camcorder off.
• You can use the zoom function during recording. page 44
• You can select the resolution of videos to be recorded. page 87
• For on-screen information display. page 29
• Eject the battery pack when you have finished recording to prevent unnecessary battery power
consumption.
• For approximate recording time. page 63
• For various functions available when you record videos. pages 74~89
• If focusing is difficult, use the manual focus function. page 80
• During recording, some button operations are unavailable. (MODE button, MENU button, etc.)
• Sound is recorded from the internal stereo microphone on the front of the camcorder. Take
care that this microphone is not blocked.
• Before recording an important video clip, make sure to test on the recording function to check
if there is any problem with the audio and video recording.
• While recording, don’t insert or eject the memory card as it may record noise.
card mode:recording/playback(VP-DX205(i)/DX2050/DX210(i) only)
STBY 0:00:00[60 Min]
0:00:03[60 Min]