32_ English
HANDLING PARTS BEFORE RECORDINGUsing the / (DISPLAY/LCD enhancer) button
To switch the information display mode ;
You can switch between the on-screen information display modes.
Slide the POWER switch downwards to turn on the power, and then press the
/ (Display/LCD enhancer) button.
Each press of the button toggles the OSD (On Screen Display) function on and off.
• Full display mode: All information will appear.
• Minimum display mode: Only operating status indicator will appear.
If the DVD camcorder has warning information, a warning message will appear.
To enhance the contrast of the LCD screen ;
You can obtain a clear and bright view on the LCD screen.
This effect also works outdoors in bright daylight.
1. Press and hold the / (Display/LCD enhancer) button.
• LCD adjust ( ) indicator appears and the LCD brightens.
2. To cancel this function, press and hold the LCD enhancer( ) button again.
• The LCD enhancer function does not affect the quality of the image being
recorded.
• When the LCD enhancer works at low illumination, some stripes may appear
on the screen. This is not a malfunction.
• Using the LCD enhancer function may cause colour looks different on the display.
preparation
STBY 0:00:00[30 Min]
STBY 0:00:00[30 Min]