English _57
Refer to the page 8 for finalised disc compatibility.
1. Turn on the DVD player/recorder.
2. Insert the finalised DVD disc into the tray of a DVD player/recorder.
It may start playing automatically or press the PLAY button to start.
For further details on playing back DVD discs, refer to the DVD player/recorder user’s manual.
To playback DVD-RW discs recorded in VR mode:
A finalised DVD-RW in VR mode can be played back in a DVD recorder that supports it.
DISC UNFINALISE ( ( ))
This function is available in DISC Record/DISC Play mode. page 26
If a DVD-RW disc had been finalised in the VR mode or Video mode, you can unfinalise the disc for further
recording. When unfinalising, there should be enough power in the batteries. If the AC power adaptor is to be
used, make sure that the jack is properly connected.
1. Slide the POWER switch downwards to turn on the power. page 26
2. Set the Storage mode switch to DISC. (VP-DX205(i)/DX2050/DX210(i) only) page 38
3. Press the MENU button, then move the Joystick right or left to select “Settings.
4. Move the Joystick up or down to select “Disc Unfinalise,” then press the Joystick.
You can simply unfinalise the disc using the FINALIZE button on the DVD camcorder.
Disc information will appear.
5. Move the Joystick to select “Execute,” and then press the Joystick.
To exit, use the Joystick to select “Back,” and then press the Joystick.
6. The message “Make the disc recordable?” will appear. Move the Joystick right or left
to select “Yes,” and then press the Joystick.
The message showing that the disc is being unfinalised will appear, and the disc will
be unfinalised.
WARNING
The unfinalise function is not available at the battery level under ( ).
During unfinalising, do not cause impact or vibration to your DVD camcorder.
This could cause a malfunction.
Settings
Disc Finalise
Disc Unfinalise
Disc Info
Exit Select
Unfinalise
Disc Type DVD-RW
(Finalised)
Disc Format VR Mode
Used 0:10:00
Free 0:20:00 (Fine)
Back Execute
Now Unfinalising...
Avoid Shock & Vibration.