English _19

INSTALLING THE BUTTON-TYPE BATTERY (VP-DX205(i)/DX2050/DX210(i) only)

Installing the button-type battery in the remote control
1. Turn the battery holder counter clockwise (as indicated with () mark) using
your fingernail or a coin to open it.
The battery holder opens.
2. Insert the battery into the battery holder with the positive (+) terminal facing
down and press it firmly until you hear a locking sound.
3. Place the battery holder back in the remote control, matching its () mark
with the () mark on the remote control, and turn the battery holder clockwise
to lock it.
Precautions regarding the button type battery
• There is a danger of explosion if the button type battery is incorrectly
replaced. Replace only with the same or equivalent type.
• Do not pick up the battery using tweezers or other metal tools. This will cause
a short circuit.
• Do not recharge, disassemble, heat or immerse the battery in water to avoid the risk of explosion.
WARNING
Keep the button type battery out of the reach of the children. Should any battery be swallowed, seek
medical attention immediately.

HOLDING THE DVD CAMCORDER

1
Battery
holder

2 3

 
2 3
1