preparation
USING THE DISPLAY (
)/iCHECK BUTTON
Switching the information display mode
You can switch between the 
)/iCHECK button.
The full and minimum display modes will alternate.
•Full display mode: All information will appear.
•Minimum display mode: Only operating status indicators will appear.
If the HD camcorder has warning information, a warning message will appear.
Checking the remaining battery and recording capacity
•When the power is on, press and hold the Display (
)/iCHECK button.
•When the power is off, press the Display (
)/iCHECK button.
•After a while, the battery time and approximate recordable time according to the storage and quality appear for about 10 seconds. If a storage media is not inserted, its icon does not appear.
Display (
)/iCHECK button does not work in the menu or quick menu screen.
USING THE LCD ENHANCER (
)
Contrast is enhanced for a clear and bright image. This effect is also implemented outdoors in bright daylight.
1.Press the LCD enhancer (
) button.
•The (
) indicator is displayed.
2.To exit LCD enhancer, press the LCD enhancer (
) button again.
•LCD enhancer function does not affect the quality of the image being recorded.
•When LCD enhancer works at the low illumination, some stripes may occur on the LCD screen. It is not a malfunction.
22_ English
Remaining battery (approx.)
Battery |
|
|
0% | 50% | 100% |
80 Min |
|
|
Memory (Super Fine) |
|
|
044 Min |
| 022 Min |
STBY 00:00:00 [44Min] | 80 |
Min |
