printing photo images
PictBridge menu
Setting the date/time imprint option
Touch Menu (
) tab “Date/Time” “Off,” “Date,” “Time,” or “Date & Time”
Return (
) tab.
To print using the DPOF setting
If the printer is compatible with DPOF, you can use the DPOF setting. page 82
•If the printer is not recognised, or to print again after direct printing with a PictBridge printer, remove the USB cable, select “PictBridge” in the menu again, and then reconnect the cable.
•If the “USB Connect” menu is set to “Mass Storage” you cannot connect a PictBridge compatible printer to the camcorder and a “Fail USB Connecting” message will appear. You must touch the “Switch Mode” tab “PictBridge” tab on the screen, and the “Connecting as Printer Mode” message will appear.
•In some instances the HD camcorder may not connect to the printer. If connection fails, disconnect the USB cable and turn off the printer and back on. Then, connect the USB cable and set the HD camcorder to “PictBridge.”
•The date/time option may not be supported by all printers. Check with your printer manufacturer. The “Date/Time” menu cannot be set up if the printer does not support this option.
•PictBridge™ is a registered trademark of CIPA (Camera & Imaging Products Association), an image transfer standard developed by Canon, Fuji, HP, Olympus, Seiko Epson, and Sony.
•Use the USB cable provided with the HD camcorder.
•Use the AC power adaptor for your HD camcorder during PictBridge direct printing. Turning your HD camcorder off during printing might damage data on the storage media.
•Movie images are not available for printing.
•You can set various printing options depending on the printer. Please refer to the user manual of the printer for details.
•Do not remove USB cable or memory card during printing.
•You may not print photo images recorded on other devices.
84_ English
Date/Time |
1 / 1 |
| Date/Time |
| Off |
| Date |
1 / 1 | Time |
| Date & Time |
