![](/images/new-backgrounds/1281328/28132827x1.webp)
Using POWERbot
You must turn on the emergency switch before using POWERbot.
Turning the power on/off
Press the | button for more than | WARNING |
3 second |
|
|
•When POWERbot is not used for
30 minutes, it will return to the docking station to charge itself automatically.
Using Auto clean mode
The POWERbot moves and cleans automatically until it cleans entire space once.
✻✻Stop cleaning: Press the button
Using Spot clean mode
The POWERbot cleans a localized area intensely.
Recharging
You may command POWERbot to recharge at the docking station automatically while it is in cleaning process.
Location recognizing function
fIf turning off the POWERbot and turning it back on, the POWERbot will search the location that it stopped previously and then clean the area where was not cleaned before.
Note
ffStart the cleaning again at the area within 1 m around where the POWERbot stopped.
it is difficult to search the location and the POWERbot may clean the area where it already cleaned.