CONTROL PANEL

For more details, see control panel of your washing machine.

POWER BUTTON

POWER

COURSE SELECT BUTTON

COURSE

Press this button once to operate.

With every press of this button,

 

 

Press once again to turn the power off.

 

the washing course changes;

 

 

 

Digital(Fuzzy) SPEEDY RINSE SPIN

 

 

 

RINSE+SPIN Digital(Fuzzy)

 

 

 

 

 

START/HOLD BUTTON

START/

WATER LEVEL SELECT BUTTON

WATER

Use to pause and restart the operation.

HOLD

According to the washload,

LEVEL

To change the washing procedure during operation,

select the water level ;

 

press this button to stop, and once again to restart

MEDIUM HIGH EXTRA LOW LOW MEDIUM

after changing the procedure.

 

 

 

 

 

 

 

WASHING PROCEDURE

Before starting washing, check the following;

Connect the water supply hose to the water tap. Leave a tap open. Plug the power cord in.

Make sure to lay down the drain hose. (In case no drain pump)

Detergent Usage

1.Put the detergent evenly into the tube before placing the laundry in.

2.If you put the detergent into the tube next to the laundry and leave it for an extended time, the laundry may become discolored.

3.Do not use too much detergent. Some of the detergent may not dissolve immediately and may remain on the laundry causing damage to it, if too much detergent is used or the water temperature is too low.

Digital(Fuzzy) COURSE

POWER

START/

Selects the best washing course

 

HOLD

automatically.

 

 

 

1.Press the POWER Button to"ON".

2.Press the START/HOLD button.

Washing,rinsing, and spinning follow.

If you want to pause, press the START/HOLD

button again.You can change the course when paused.

3.Close the lid.

SPEEDY COURSE

POWER

COURSE

START/

HOLD

Because washing is speedy,

 

 

 

 

it is good for light or less stained laundry.

1.Press the POWER Button to"ON".

2.Press the course select button once.

3.Press the START/HOLD button

Washing, rinsing, and spinning follow.

If you want to pause, press the START/HOLD

button again.You can change the course when paused.

4.Close the lid.

RINSE COURSE

HOLD

POWER

COURSE

START/

When you want rinse only do the followings.

1.Press the POWER Button to "ON".

2.Press the course select button twice.

3.Press the START/HOLD button

4.Close the lid.

 

SPIN COURSE

 

START/

HOLD

 

POWER

COURSE

 

When you want spin only do the followings.

1.Press the POWER Button to "ON". 2.Press the course select three times. 3.Press the START/HOLD button.

4.Close the lid.

RINSE+SPIN

POWER

COURSE

START/

HOLD

1. Press the POWER Button to "ON".

2. Press the course select button four times.

3. Press the START/HOLD button.

4. Close the lid.

Rinsing and spin drying follow.

4