IBM DCS9550 1S1 manual Drive Carrier Installation 2.10.1 Parts Check List, Procedure

Installation

2.10Drive Carrier Installation

2.10.1Parts Check List

•Drive Carrier module, or

•Dummy Carrier module

2.10.2Procedure

1Ensure that the anti-tamper lock is disengaged.

2Release the carrier handle by pressing the latch in the handle towards the right.

3Insert the carrier into the enclosure (Figure 2–10).

Important For a Rack Mounted System: Ensure that the carrier is oriented so that the drive is uppermost and the handle opens from the left.

Slide the carrier, gently, all the way into the enclosure until it is stopped by the camming lever on the right of the carrier (Figure 2–11).

4Cam the carrier home - the camming foot on the base of the carrier engages into a slot in the enclosure. Continue to push firmly until the handle fully engages. You should hear a click as the latch engages and holds the handle closed (Figure 2–12).

Note Ensure that the Handle always opens from the left.

IBM System Storage DCS9550 1S1 Storage Expansion Unit Installation, Service, and User Guide 27