IBM DCS9550 1S1 manual Dummy Carrier Modules, Engaging the Anti-tamper Locks, Activating the Locks

Installation

Figure 2–12Installing an SATA Drive Carrier Module (3)

Note Removal is the reverse of this procedure (press on the latch to release the handle).

2.10.3Dummy Carrier Modules

Any unused drive bays must be fitted with a dummy carrier module.

2.10.4Engaging the Anti-tamper Locks

The anti-tamper locks are fitted in the drive carrier handles and are accessed through the small cutout in the latch section of the handle.

Drives are supplied with the locks set in the locked position.

2.10.4.1Activating the Locks

1Carefully insert the lock key provided into the cutout in the handle.

2Locate the key into its socket.

3Rotate the key in a clockwise direction until the indicator is visible in the aperture beside the key.

IBM System Storage DCS9550 1S1 Storage Expansion Unit Installation, Service, and User Guide 29