IBM DCS9550 1S1 manual Korean Class A Electronic Emission Statement, Rack System Precautions

P r e f a c e

Korean Class A Electronic Emission Statement

l

Rack System Precautions

The following safety requirements must be considered when the product is mounted in a rack.

!Do not slide more than one product enclosure chassis out of the rack at a time, to avoid the rack from toppling over.

Warning

ESD Precautions

Caution ! It is recommended that you wear a working (examine before wearing) anti-static wrist or ankle strap and observe all conventional ESD precautions when handling Chassis slug-in modules and components. Avoid contact with backplane components, module connectors, etc.

Data Security

•Before beginning product installation, power down your host computer and all attached peripheral devices.

•Disk drives are fragile. Handle them with care, and keep them away from strong magnetic fields.

•All the supplied plug-in modules and blanking plates must be in place for the air to flow correctly around the enclosure and to complete the internal circuitry.

•If the subsystem is used with modules or blanking plates missing for more than a few minutes, the enclosure can overheat, causing power failure and data loss.

•If you remove any drive module, you may lose data.

•If you remove a drive module, replace it immediately. Replace it with a drive module of the same type and capacity

•Do not abandon your backup routines. No system is completely foolproof.

viii IBM System Storage DCS9550 1S1 Storage Expansion Unit Installation, Service, and User Guide