Brother PT-97OOPC Installing the BRAdmin Light configuration utility, Click Utility Installation

■Installing the BRAdmin Light configuration utility

The BRAdmin Light is a utility for initial setup of Brother network connected devices. It can also search for Brother products on your network, view the status and configure basic network settings, such as IP address.

For more information on BRAdmin Light, visit us at http://solutions.brother.com/

Note

●If you require more advanced printer management, use the latest Brother BRAdmin Professional utility version that is available as a download from http://solutions.brother.com/

●If you are using Personal Firewall software, BRAdmin Light may fail to detect the unconfigured device. In that case, disable your Personal Firewall software, try BRAdmin Light again. Restart your Personal Firewall software after the address information is set.

1Click [Utility Installation].

This screen is the same screen as you see when you insert the CD-ROM.

2Click [BRAdmin Light] and follow the on- screen instructions.

If the Windows Firewall is enabled on your computer, the message “Do you wish to add this application to the list of exceptions?” appears. Check your computer environment and choose [Yes] or [No].

■Setting your IP address, Subnet Mask and Gateway using BRAdmin Light

1Click “Start”-“All Programs (Programs)”- “Brother”-“BRAdmin Light”.

BRAdmin Light will search for new devices automatically.

Note

●If you have a DHCP/BOOTP/RARP server in your network, you don’t have to do the following operation. Because the print server will automatically obtain its IP address.

2Double-click the unconfigured device. The default password is “access”.

25