Brother PT-97OOPC manual ABC Company

4Scanbarcode.the “P-touch template command”

Refer to “List of barcodes for specifying settings” (→ P.51).

5From the “Basic settings” barcodes, scan the barcode for the parameter whose setting is to be specified.

Note

●Settings can be specified for multiple parameters.

●If no settings have been specified, a label will be printed by P-touch Template Settings. The default settings for P-touch Template Settings is a single copy with “Auto cut on” and “Half cut on”. For details on P-touch Template Settings, download “P-touch Template manual" (English only) from the following web site.

http://solutions.brother.com/

[Select your region/country]-[Choose your product]-[Downloads].

●To specify the number of copies to be printed, scan the “Number of copies” barcode, and then scan the barcodes under “For entering numbers” to specify a three-digit number. The setting is automatically applied when three digits have been specified.

Example:

Specify numbers by scanning barcodes as follows: 7→[00][7], 15→[0][1][5]

●To change the setting for the number of copies, scan the “Number of copies” barcode again, and then scan the barcodes for the new three-digit number.

6Scan the “Select template” barcode, and then scan the barcodes under “For entering numbers” to specify the “Key Assign” number (three digits) for the barcode template.

Note

●The setting is automatically applied when three digits have been specified. Example:

Specify numbers by scanning barcodes as follows: 7→[00][7], 15→[0][1][5]

●To change the number, scan the “Select template” barcode again, and then scan the barcodes for the new three-digit number.

7Scan the key barcode whose data is to be used in the database file.

8Scan the “Delimiter” barcode.

9Scan the “Begin printing” barcode.

0The object data in the specified template is replaced with the database data, and the labels are printed.

ABC Company

Planning

Walter Freeman

8766

41