Brother PT-97OOPC manual USB port USB cable AC adapter jack AC adapter LAN port

3

4

5

After the installation is completed and the screen shown below is displayed, click [Close].

The installation of printer driver is completed.

Next, install the P-touch Editor 5.0.

Double click “P-touch Editor 5.0 Installer.mpkg”.

The P-touch Editor 5.0 Installer starts up. Follow the on-screen instructions.

When the installation is completed and the message “Click Restart to finish installing the software” is displayed, click [Restart].

The Macintosh® is restarted.

The installation of software is completed.

6After restarting the computer, connect your printer to the computer by using the USB/LAN cable, and then turn on the printer.

USB port

USB cable

AC adapter jack

AC adapter LAN port

Note

●If you are connecting the printer to Macintosh® via a USB hub, it may not be detected correctly. If so, connect the

printer directly to the USB port on Macintosh®.

7For Mac OS® X 10.3.9 - 10.4.x

Double click the drive where Mac OS® X is installed, and click in order of “Applications” - “Utilities” - “Printer Setup Utility”.

For Mac OS® X 10.5.x - 10.6

Click in order of “Apple menu” - “System Preferences”, and click “Print & Fax”. Then click to add your printer.

27