Installing a Replacement Battery
Follow the steps below if you need to replace a battery. 1) Press down on the handset battery case cover
(use the finger indention for a better grip) and slide the cover downward to remove.
2) Remove the existing battery and unplug the connector from the jack.
3)Plug the battery pack connector (red & black wires) into the jack inside the battery compartment.
(The connector notches fit into the grooves of the 
jack only one way.) Match the wire colors to the 
polarity label in the battery compartment, connect the 
battery, and listen for a click to insure connection. 
4) Make sure you have a good connection by slightly
pulling on the battery wires. If the connection is secure, the battery jack will remain in place.
5)Place the battery case cover back on the handset by sliding it upwards until it clicks into place.
[33]
Use only the
Uniden
rechargeable battery pack
ADDITIONAL INFORMATION
