If the next character uses the same number key, you must press the #/ 
key to move the cursor over. Otherwise the next time you press the number key, it changes the character that was
previously set.
4)Enter a name according to the instructions below, then press the select key. If no name is required, go to step 5.
•The name can be up to 13 characters.
•Use the #/
and 
/tone/ 
keys to move the cursor to the desired location.
•Use the delete/channel key to delete characters as needed.
•Press and hold the delete/channel key to delete all the characters.
Refer to the letters on the number keys to select the desired characters. With each press of a numeric key, the displayed character appears in the following order:
Upper case letters first, lower case letters next and finally the number corresponding to the key.
If you make a mistake while entering a name
Use the 
/tone/
or #/ 
key to move the cursor to the incorrect character. Press the delete/channel key to erase the wrong character. Then enter the correct character. To delete all characters, press and hold the delete/channel key.
For example, to enter Movies.
1. Press 6 once. Then press the #/ 
key to move the cursor to the right.
2. Press 6 six times.
3. Press 8 six times.
4. Press 4 six times.
5. Press 3 five times.
6. Press 7 eight times.
[22]
