Uniden SS E15 owner manual Connect the Base Unit and Charge the Handset

￿Use only the supplied AAD--041S AC adapter. Do not use any other AC adapter.

￿Do not place the power cord where it creates a trip hazard or where it could become chafed and create a fire or electrical hazard.

B. Connect the Base Unit and Charge the Handset

1)Connect the AC adapter to the DC in 9V jack and to a standard 240V AC wall outlet.

• Connect the AC adapter to a continuous power supply.

• Place the base unit close to the AC outlet so that you can unplug the AC adapter easily.

The rechargeable battery is already installed in your phone.

2)Place the handset in the base unit.

3)Make sure that the charge/in use LED illuminates.

If the LED does not illuminate, check to see that the AC adapter is plugged in and the handset makes good contact with the base charging contacts.

4)Charge the handset battery pack for at least 15-20 hours before using your new cordless telephone for the first time! To maximize the charge capacity of your battery pack, DO NOT plug the telephone cord into the base unit and wall jack until the battery is fully charged.

[6]