Brother PT-97OOPC manual LED display on USB Direct Interface PT-9800PCN only, Lamp condition

Lamp condition
Power button	STATUS lamp	Condition	Remedy
(green)	(red)
		Cutter error	Confirm that the tape is not jammed
			in the printer. If necessary, turn the
			printer off and on. If the STATUS
Lit	Flashing fast	Roller holder error	lamp continues to flash, contact the
			reseller where the printer was
			purchased or call Brother customer
			service.
		Print head overheat error	Turn the printer off and on.
		EEPROM error	Turn the printer off and on. If the
Lit	Flashing very		STATUS lamp continues to flash,
			contact the reseller where the
	fast	Circuit board error
			printer was purchased or call
			Brother customer service.
Not lit	Lit	Booting	—

■LED display on USB Direct Interface (PT-9800PCN only)

Lamp condition		Condition	Remedy
Color	Condition
—	Not lit	USB device not connected	—
Green	Lit	USB device connected	—
	Flashing	HUB connected	Disconnect USB device.
		Noncompliant USB device	Disconnect USB device.
		connected
			Data sent from the barcode reader is
Red	Flashing fast		saved on the printer.
		“Buffer full” error with USB	Do not use the barcode reader to
		Direct Interface	consecutively scan barcodes or use
			the barcode reader with multiple
			interfaces at the same time.
	Flashing very	Overcurrent	Disconnect USB device and turn the
	fast		printer off and on.

13