Installation
Installation
| Pump type (Applicable models only) |
A | 1. Open the hose cap (A), and insert the |
| drain hose. Tighten the drain hose using |
| the joint ring. |
NOTE
• The position (side or rear) of the drain outlet depends on the model.
• Availability of the hose cap depends on the model.
2. Connect the other end of the drain hose to a standpipe or basin that is positioned
WARNING
Make sure the end of the drain hose is not submerged by water. Otherwise, the washing machine may suffer serious damage.
18 English
2/22/2017 3:55:53 PM