30_ maintaining your washer
maintaining your washerPuRE CyCLETM
Pure Cycle is a self-cleaning cycle that removes mold that may occur
inside the washing machine.
1. Press the Power button.
2. Select the Pure CycleTm course.
• Once the Pure CycleTM course is selected, the only function
that can be set is Delay Start.
3. Press the Start/Pause button.
• If you press the Start/Pause button, Pure Cycle begins.
• Using Pure Cycle, you can clean the drum without using a cleansing agent.
• Never use Pure Cycle when laundry is in the washing machine. This may cause damage to
the laundry or a problem with the washing machine.
The Pure Cycle Auto indicator Function
• If the “Pure Cycle” is lit after a wash, it indicates that
tub (drum) cleaning is required. In this case, remove
the laundry from the washing machine, turn the power
on, and clean the drum by running Pure Cycle.
• If you do not run Pure Cycle, the “Pure CycleTM”
indicator turns o. However, the “Pure CycleTm”
indicator will light again after two washes. Not running Pure Cycle at this point will not cause
a problem with the washing machine.
• Although the Pure Cycle Auto Indicator appears once a month or so, the frequency may dier
depending on the number of times the washing machine is used.
WA50F9A7D*
WA50F9A8D*
WA50F9A6D*
CAuTion