Samsung WA50F9A8DSP Information codes, Code Symbol Meaning Solution, Directly to the unit

Information codes

The Washer may display information codes to help you understand what is occurring with your Washer better.

CODE SYMBOL	MEANING	SOLUTION
	The Water Level sensor is not	Call for service.
	working properly.
	Your Washer has tried to fill but	Make sure the water faucets are open all the
	was unsuccessful.	way. Check for kinked hoses.
		Check the inlet screens on the fill hoses.
		If you use a Flood Safety Device, then please
		remove the device and connect the water hoses
		directly to the unit.
	Check if the hot water supply	You must connect the hot water supply hose
	hose is connected	because hot water is supplied by the Auto
		Temperature Control (A.T.C.) function.
	Your washer is not draining. It can	Do the following:
	also mean that the unit senses a	1) Turn off the unit and turn it on again.
	small clog while draining.
		2) Select only the Spin Cycle.
		3) Press the Start/Pause to drain the water.
		If it still does not drain, call for service.
	Your Washer has tried to fill but	Call for service.
	has not reached the proper water
	level.
	Unbalanced load prevented your	Redistribute the load, press the Start/Pause
	Washer from spinning.	button.
	Lid is open when washer is	Close the lid tightly and restart the cycle. If the
	running.	code reappears, call for service.
	Your washer failed to lock the lid.	Close the lid tightly and restart the cycle. If the
		code reappears, call for service.
	The door will not unlock.	Make sure the lid is firmly closed.
		Push the Power button to turn off your washer,
		then turn it on again. If the code reappears, call
		for service.
	Jammed Key.	Call for service
	Motor not running properly.	Restart the cycle pressing the Start/Pause
		button. If the code reappears, call for service.
	Communication error between	Call for service.
	SUB PBA and MAIN PBA

05 troubleshooting

troubleshooting _33

F900A WASH_WA50F_USER MANUAL_DC68-03133H-03_EN.indd 33

2013-12-23 19:17:05