
troubleshooting and information codes
CHECK THESE POINTS IF YOUR WASHING MACHINE...
PROBLEM | SOLUTION |
|
|
will not start.. | • Make sure the door is fi rmly closed. |
| • Make sure your Washer is plugged in. |
| • Make sure the water source faucets are open. |
| • Make sure to press the Start/Pause Button to start your Washer. |
| • Make sure the Child Lock is not activated; see page 26. |
| • Before your Washer starts to fi ll, it will make a series of clicking noises |
| to check the door lock and do a quick drain. |
| • Check the fuse or reset the circuit breaker |
|
|
has no water or not enough | • Turn both faucets on fully. |
water.. | • Make sure the door is tightly closed. |
| • Straighten the water inlet hoses. |
| • Disconnect hoses and clean screens. Hose fi lter screens may be |
| clogged. |
| • Open and close the door, then press the Start/Pause Button. |
|
|
has detergent remains in | • Make sure your Washer is running with sufficient water pressure. |
the automatic dispenser | • Make sure the Detergent Selector dial is in the upper position when |
after the wash cycle is | using granular detergent. |
complete. |
|
|
|
vibrates or is too noisy. | • Make sure your Washer is set on a level surface. If the surface is not |
| level, adjust your Washer feet to level the appliance. |
| • Make sure that the shipping bolts are removed. |
| • Make sure your Washer is not touching any other object. |
| • Make sure the laundry load is balanced. |
|
|
stops | • Plug the power cord into a live electrical outlet. |
| • Check the fuse or reset the circuit breaker. |
| • Close the door and press the Start/Pause Button to start your |
| Washer. |
| For your safety, your Washer will not tumble or spin unless the door |
| is closed. |
| • Before your Washer starts to fi ll, it will make a series of clicking noises |
| to check the door lock and do a quick drain. |
| • There may be a pause or soak period in the cycle. Wait briefl y and it |
| may start. |
| • Check the screens on the inlet hoses at the faucets for obstructions. |
| Clean the screens periodically. |
|
|
TROUBLESHOOTING
English _39
4/7/2016 10:08:43 PM |