![](/images/new-backgrounds/1226445/22644529x1.webp)
Washing a Load of Laundry
Washing clothes using Fuzzy Logic
Your new washing machine makes washing clothes easy, using Samsung’s“Fuzzy Logic” automatic control system. When you select a wash program, the machine will set the correct temperature, washing time, and washing speed.
To wash clothes using the Fuzzy Logic programs:
1.Turn on your sink’s water faucet.
2.Press the Power button.
3.Open the door.
4.Load the articles one at a time loosely into the drum, without overfilling.
5.Close the door.
6.Add the detergent, softener, and prewash detergent (if necessary) into the appropriate compartment.
Notice: Prewash is only available when washing Towel, Cotton, Boil,
7.Turn the Fuzzy Control dial to select the appropriate program for the type of clothes Towel, Blanket,
Delicate, Clean Tub.
You will see the indicators light up on the control panel.
8.At this time, you can control the wash temperature, rinsing times, spin speed, delay time, silver wash and dry button by pressing the appropriate option button.
(delay time, silver wash and dry button can be selected optionally by user.)
9.Press the Start/Pause button on the Fuzzy Control dial and the wash cycle will begin. The process indicator will light up and the remaining time for the cycle will appear in the display.
Pause Option
Until water supply is completed after starting operation, it is possible to put in the laundry or take out. If push Start/Pause button, the door is unlocked immediately.
In case of too hot or too much water in washer, the door can not be opened.
After closed the door, one more push Start/Pause button to make washing process going on continuously.
When the cycle is finished:
After the total cycle has finished, the power will turn off automatically.
1.Open the door.
Notice: The door will not open untill the machine stops or the power turns off.
2.Remove laundry.
SAMSUNG Washing Machine Owner’s Instructions