2.Use a Philips screwdriver to loosen four screws on the adaptor.
3.Hold the adaptor and turn part (C) in the arrow direction to loosen it by 5 mm (*).
C
Installation
C
E
4. Insert the adaptor into the water tap, and tighten the screws while lifting up the adaptor.
5. Turn part (C) in the arrow direction to tighten it.
6.While holding down part (E), connect the
water supply hose to the adaptor. Then, release part (E). The hose fits into the adaptor with a clicking sound.
English 21
|
| 2017/12/5 17:17:08 | |
|
| ||
|
|
|
|