Samsung WD8754CJF/XTC manual Prewash

		Spin - Performs an additional spin cycle to remove more water.
		Rinse + Spin - Use for a load that needs rinsing only or to add rinse-
		added fabric softener to a load.
		Drain Only - Turn the Cycle Selector to the Spin position, press the
		Spin button, and then press the Start/Pause button to drain the water.
3	PREWASH	Press this button to select pre-wash. Pre-wash is only available with:
	SELECTION BUTTON	Cotton, Synthetics, Denim, Sports Wear, Daily Wash.
	DELAY END	Press this button repeatedly to cycle through the available Delay End
4		options (from 3 hours to 19 hours in one hour increments).
	SELECTION BUTTON
		The hour displayed indicates the time when the wash cycle will be finished.
5	TEMPERATURE	Press this button repeatedly to cycle through the available water
	SELECTION BUTTON	temperature options: (Cold Water , 30 ˚C, 40 ˚C , 60 ˚C and 95 ˚C).

6RINSE SELECTION Press this button to add additional rinse cycles. The maximum number

BUTTONof rinse cycles is five.

Press the button repeatedly to cycle through the available speeds for the spin cycle.

		WD8754		, , 400, 800, 1200, 1400 rpm
	SPIN SELECTION
7		WD8752		, , 400, 800, 1000, 1200 rpm
	BUTTON
		“No spin ” - The laundry remains in the drum and no spin cycle is
		performed after the final drain.
		“Rinse Hold	” -The laundry remains soaking in the final rinse water. Before

the laundry can be unloaded, either a Drain or Spin cycle must be performed.

		Pressing the button cycles through the following options.
		Cup Board	→ Low Temp → Iron → Time Dry	(30min. →
		1:00min. → 1:30min. → 2:00min. → 2:30min. → 3:00min. → 3:30min. →
		4:00min. → 4:30min.) → Cup Board
		“Cup Board	” - Use this cycle to dry loads such as cotton, underwear,
		and linen.
		“Low Temp	” - This cycle protect heat-sensitive items at a low drying
		temperature.
8	DRYING BUTTON	“Iron ” - Finishes the dry cycle in a moist state appropriate for Ironing.
		“Time Dry	” -Dry the laundry for the specified period of time.
		• You must avoid washing laundry that may not be dried as it may
		be deformed even at low temperatures.
		• The Cup Board, Low Temp, Iron and Time Dry options detect
		the weight of the laundry in order to display an accurate drying
		time and dry them more completely.
		• The drying conditions may differ depending on the type and the
		amount of laundry.
9	INTENSIVE WASH	Press this button when the laundry is heavily soiled and needs to be
	SELECTION BUTTON	washed intensively. The cycle time is increased for each cycle.
	SILVER WASH	Silver Wash water is supplied during the wash cycle as well as during
10		the last rinse cycle, removing bacteria as well as giving protection from
	SELECTION BUTTON	bacterial growth for up to one month.
11	START/PAUSE	Press to pause and restart a cycle.
	SELECTION BUTTON
		Press it once to turn your washing machine on, press it again to turn your
12	POWER BUTTON	washing machine off. If the washing machine is left on for more than 10
		minutes without any buttons being touched, the power automatically turns off.

washing a load of laundry _23

02 WASHING A LOAD OF LAUNDRY

WD8754DJ-02696E-02_EN.indd 23

2010-07-16 ¿ÀÈÄ 1:34:15