STEP 3 - Set Auto Dispense
The Auto Dispense unit dispenses an appropriate amount of detergent and fabric softener into the drum according to the course and cycle.
1.Both Auto Detergent and Auto Softener are set to On by default. To change the setting, slide the corresponding bar to Off.
2.Set the Amount and the Water Hardness.
3.Set the Amount and the Concentration.
4.Tap Next.
| Step 3 of 4. Set Auto Dispense |
|
| ||
Auto Detergent | On | Auto Softener | On | ||
Amount |
|
| Amount |
|
|
Less | Std. | More | Less | Std. | More |
Water Hardeness |
| Concentration |
|
| |
Soft | Medium | Hard | Normal | 2X | High |
Previous Next
START YOU BEFORE
STEP 4 - Set Auto Update
Auto Update updates the firmware automatically for improved performance and/or to fix known bugs through communication with the update server. Once the firmware is updated, some functions of the washing machine may not be available depending on the firmware version.
1.To update the firmware automatically, set Auto Update to On.
2.Tap Done.
Step 4 of 4. Set Auto Update
On
The Auto Update function automatically updates the software for performance improvement purposes ot to x bugs through communicating with the update server. If you agree to this setting, it is regarded as an agreement to running the auto update operation. When the software is updated, some software features may become
Previous Done
STEP 5 - Run Calibration (recommended)
Calibration ensures accurate weight detection by the washing machine. Make sure the drum is empty before running Calibration.
1.Tap Settings > Calibration > Start.
•The door will be locked during the operation.
•The drum keeps rotating clockwise and anticlockwise for several minutes.
2.When complete, the washing machine turns off automatically.
English - 19
|
| ||
|
| ||
|
|
|
|