C |
2.Use a Philips screwdriver to loosen four screws on the adaptor.
3.Holde the adaptor and turn part (C) in the arrow direction to loosen it by 5 mm
(*).
Installation
4. | Insert the adaptor into the water tap, |
| and tighten the screws while lifting up |
| the adaptor. |
5. | Turn part (C) in the arrow direction to |
C | tighten it. |
| |
6. | While holding down part (E), connect the |
| water hose to the adaptor. Then, release |
| part (E). The hose fits into the adaptor |
E | with a clicking sound. |
English 19
2016/9/27 15:48:24
