Installation

Installation

7. If you are using a screw type of water tap, use the provided screw-type adaptor to connect to the water tap as shown.

8. Connect the other end of the water hose to the inlet valve on the back of the washing machine. Turn the hose clockwise to tighten.

9. Open the water tap and check if there are any leaks around the connection areas. If there are water leaks, repeat the steps above.

WARNING

Stop using the washing machine if there is a water leak, and contact a local Samsung service centre. Otherwise, this may cause electric shock.

CAUTION

Do not stretch the water hose by force. If the hose is too short, replace the hose with a longer, high-pressure hose.

20  English

 

 

 

 

WW70K5213YW_DC68-03677R_EN.indd 20

2016/9/27 15:48:24