Problem |
| Action | |
|
| ||
| Check the drain hose. | ||
LC | • Make sure the end of the drain hose is placed on the floor. | ||
• | Make sure the drain hose is not clogged. | ||
| |||
| • If the information code remains, contact a customer service | ||
|
| centre. | |
|
| ||
|
| NOTE | |
LC1 |
| When the washer displays the “LC”/“LC1” code, the washer | |
|
| do draining for 3 minutes. During this time, the Power | |
|
| button is inoperative. | |
|
| ||
| Spinning does not work. | ||
| • Make sure laundry is spread out evenly. | ||
UB | • Make sure the washing machine is on a flat, stable surface. | ||
• | Redistribute the load. If only one item of clothing needs | ||
|
| washing, such as a bathrobe or pair of jeans, the final spin | |
|
| result might be unsatisfactory, and an “UB” check message | |
|
| will be shown in the display. | |
|
| ||
| Check the Motor for operation. | ||
3C | • Try restarting the cycle. | ||
• | If the information code remains, contact a customer service | ||
| |||
|
| centre. | |
The electronic control needs to be checked (Over Voltage Error).
•Check the PCB and wire harness.
•Check if power is supplied properly.
•If the information code remains, contact a customer service
UCcentre.
Low voltage detected
•Check if the power cord is plugged in.
•If the information code remains, contact a customer service centre.
| High temperature heating check |
HC | • If the information code remains, contact a customer service |
| centre. |
Troubleshooting
English 49
|
|
|
|
2016/4/1 13:34:52 | |||
|
|
|
|