Operations

Operations

Control panel

02

 

 

 

 

 

 

11

08

10

 

09

 

 

 

12

07

 

 

 

03

04

05

06

01

Cycle Selector

Turn the dial to select a cycle.

 

 

 

 

 

The display shows current cycle information and estimated time

02

Display

remaining, or an information code when a problem occurs.

 

 

For buttons and icons, refer to the corresponding page..

Press to change the water temperature for the current cycle.

03 Temp.

Press and hold for 3 seconds to turn on/off the Drum Light.

 

The drum light turns off automatically after 2 minutes.

04

Rinse

Press to change the rinse count for the current cycle. You can set the

rinse count to a max of 5, depending on the cycle.

 

 

Press to change the spinning speed for the current cycle. The revolutions per minute (RPM) differs with the model.

•Rinse Hold( ): The final rinse process is suspended so that the laundry remains in the water. To unload the laundry, run a drain or spin process.

-To use the Rinse Hold option, press Spin repeatedly until all rpm numeric indicators turn off. Not available for the DRAIN/

 

 

SPIN cycle.

05

Spin

• No Spin( ): The drum does not rotate after the final drain

process.

 

 

-To use the No Spin option, press Spin repeatedly until all rpm numeric indicators turn off. Only available for the DRAIN/ SPIN cycle.

•Spin Only: To run the Spin Only cycle, press Spin for 3 seconds. When the cycle time and spinning speed appear, press Spin repeatedly until a desired spinning speed is selected. Then, press and hold Start/Pause (Hold to Start) to start the cycle. The spinning time depends on the selected cycle.

32  English

WW90M740NOA_DC68-03889H_EN.indd 32

 

 

2018/2/7 14:06:14