Using the TPM Security Device (Optional)

Chapter 3. 73

Using the computer

4

Select Save to save the changes.

 

 

If the system automatically restarts and the Samsung logo

5 screen appears, press the Home button

several times.

6

Select Security > TPM Configuration and set the TPM

Device item to Enabled.

 

Set the TPM State to Enable & Activate.

TPM Device

Enabled

 

 

TPM State

Clear

 

Security Chip State

Enabled & Activate

Clear

 

 

Enabled & Activate

 

Deactivate & Disable

 

 

 

Aptio Setup Utility - Copy (C) 2012 American Megatrends, Inc.

7

Select Save to save the changes.

8

The computer automatically restarts. Initialization of the TPM

chip has been completed. Now, install the TPM program and

register the TPM program.

Installing the TPM program

You can install the TPM program as follows. Install the program according to the procedures below.

This program is only provided for models with Recovery and the TPM function.

When the computer is off, press the Power button while

1 holding down the Volume (+) button.

Select Recovery to enter software recovery mode.

2 YesSelect.

System Software. If the message box appears, click

The computer boots up in Windows.

3 runs.If you move to the Desktop screen, the SW Update program Select TPM Host SW and click Install Now.

If the system software media is supplied with the product, you can install the program by using the system software media (only when supplied.)

4 After the installation, if you click OK, the computer restarts.

Page 74
Image 74
Samsung XE700T1C-A01US manual Installing the TPM program