Samsung YP-N30S Connecting yepp to PC with USB cable, HowHow toto checkcheck USBUSB driverdriver

Connecting yepp to PC with USB cable

3 Plug one end of the USB cable into the USB port on the back of the PC.

4 Insert the battery into the yepp and turn on the power.

5 Slide down the bottom cover of the player. Plug the other end of the USB cable

into the USB port on the right side at the bottom.

●PC may temporarily malfunction if you unplug the USB cable from PC while yepp Explorer is initiating or executing a command.

6 USB driver is installed a message saying that it is searching for a new device. You may not see the display screen during installation.

Go to the device manager to check that installation has been successfully completed.

USB connect cable

7 When USB driver is installed, "SAMSUNG YP-N30” will appear in [System Properties] ➝ [Device Manager] as shown in the picture

to the right.

Note :

HowHow toto checkcheck USBUSB driverdriver

Windows 98,ME:

Control Panel ➝ System ➝ Device Manager ➝

Universal Serial Bus controllers/SCSI and RAID controllers

Windows 2000:

Control Panel ➝ System ➝ Hardware ➝

Device Manager

Windows XP:

Control Panel ➝ System ➝ Hardware ➝

Device Manager

8 When USB driver is not Installed automatically, refer to next page.

14 15