Playing Music, Searching for Music/Voice Files

Playing Music

Make sure the player is fully charged and the earphones are connected.

Power On : Press and hold the button to turn on the power.

Power Off : Press and hold the button to turn off the power.

I Playing Music

Press the button.

●Playback starts.

●If no buttons are pressed within 1 minute (changes depending on settings shown on page 38), the player automatically powers off.

●While in Pause mode, press the button again to resume playback.

I Adjusting the Volume

Press , to adjust the volume from 00 to 40.

In Hold mode, all buttons are disabled. This function is useful when you are walking or jogging.

Slide the switch in the direction of the arrow.

●When the button is pressed, the “HOLD” message will appear on the display.

✍Note

-If the file name is not displayed correctly, move to [Settings] ➔ [Display] ➔ [Language] and then change the language setting.

-WMA files can only be played as music files with a compression rate of 48Kbps-192Kbps.

-The power off time can be set in the menu. See page 38.

●Press and hold the , button during playback to search for the part you want to listen to.

●Release the button to resume play normally.

●Press the button briefly during playback to play the next track.

●Press the button briefly within 5 seconds after playback starts to move to and

play the previous track. Press the button briefly after 5 seconds to play the current track from the beginning.

●Press the , button in Stop/Pause mode to move to the previous/next track.

✍Note

-VBR(Variable Bit Rate) file: A file that constantly changes the compression rate according to the type of sounds, such as their pitch, in the file.

-When playing a VBR file, you cannot move to and play the previous track even if you press the within 5 seconds after playback starts.

-Files that were downloaded in MP2 or MP1 and had their file extension changed to MP3 may not play.

ENG