![](/images/new-backgrounds/1265019/26501915x1.webp)
360 Herndon Parkway Suite 1400 Herndon, VA 20170 http://www.rheintech.com
3 PRODUCT LABELLING/ INFORMATION TO THE USER
3.1DOC LABEL ON DEVICE
The label shall be located in a conspicuous location on the device and shall contain the unique identification described in FCC CFR 47; Section 2.1074 (the unique model name), and the following DoC logo:
SanDisk Corporation | SanDisk SSD SATA 5000 2.5” |
3.2DOC STATEMENT IN USER’S MANUAL
For a Class B digital device or peripheral, per FCC CFR 47; Section 15.105, the instructions furnished the user shall include the following or similar statement, placed in a prominent location in the text of the manual:
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
3.3LOCATION OF LABEL ON EUT
Label |
Location |
SanDisk Corporation | Page 8 of 17 |
DoC Report |
|
2006137 |
|
04/27/07 |
|