Attach Lower Handle
Raise the dust cup support. Push the lower handle (largest end down) through the tube of the dust cup support and into the handle socket at the back of the cleaner. Make sure the notches on the lower handle face the rear of the cleaner (Fig. 1). Align the holes, insert a
A
TubeA
Dust Cup
LowerSupport
Handle
Toward Rear
of Cleaner
Fig. 1
Handle
Socket
Assemble Upper Handle
A A
Upper Handle
Hold the upper handle so it curves away from the cleaner. Then push it down over the lower handle. Secure with the other 2- part handle bolt (A).
Lower
Handle
Handle
Socket
Secure Cord Clamp
Secure the electrical cord to the dust cup support with the cord clamp and screw (D). Place the cord clamp over the electrical cord. Screw the clamp to the tab below the left latch; start the screw by hand, then tighten.
7