GENERAL INFORMATION
The cleaner is designed to pick up dirt and dust particles. Avoid picking up hard or sharp objects with the cleaner to prevent bag tears, hose clogs, and fan blade breakage with subsequent motor damage.
Service Information
The instructions in this booklet serve as a guide to routine maintenance. For additional service information telephone our toll free number for the nearest Eureka Authorized Warranty Station. You should know the model, type and serial numbers when you call:
USA: 1-800-282-2886
Mexico:
Canada:
If you prefer, you can write to The Eureka Company, Service Division, 807 North Main Street, Bloomington, Illinois 61701, USA. In Canada write to The Eureka Company, 866 Langs Drive, Cambridge, Ontario N3H 2N7.
DO NOT OIL the motor or the brush roll at any time. The bearings are permanently lubricated and sealed.
HOW TO ASSEMBLE
CAUTION: Fully assemble the cleaner before using.
Assembly Packet
The assembly packet contains two
Secure Bellows
Check to be sure the end of the bellows is secure in the chrome bellows adapter. Align the screw holes in the bellows adapter with the back of the base, start the screws (C) by hand, and tighten.
A | B | C | D |
Cord | Bellows | Cord | |
Handle | Hooks | Screws | Clamp |
Bolts |
|
| and |
|
|
| Screw |
6
