Stainless Series Gas Grill
Assembly Instructions Chapter 2
Tools needed to assemble grill: | Getting Started |
· 10mm | 1. Please follow the steps in the order that |
· | they are presented. |
| 2. Assemble the grill where you plan to use |
(tools not included) | it. |
| 3. You may want to place an old towel or |
| cloth at the assembly site to prevent nuts |
| and bolts from becoming lost. |
| 4. For each step, loosely tighten all the |
| fasteners before tightening them completely. |
| 5. Have a friend help. An assistant can |
| make the assembly easier by holding the |
| parts in place while you fasten the nuts and |
| bolts. |
| 6. To be ready to barbecue immediately, |
| have the L.P. gas cylinder filled by an |
| authorized L.P. dealer or cylinder exchange |
| center. |
| Unpacking the Grill Parts |
| 1. Remove and set aside all inner boxes |
| and parts from the master carton. |
| 2. Remove and set aside all wrapping |
| paper, zip ties, and additional protective |
| packaging from the parts. |
| 3. Do not destroy carton or packing until |
| your grill is completely assembled and |
| operating to your satisfaction. |
| 4. For ease and safety, lock the casters |
| during assembly. |
| Consumer: |
| Your grill is packaged with a merchandiser |
| purchase label. To remove the label, unscrew the |
| igniter button, remove and discard the label, then re- |
| attach the igniter button. |
| Retailer/Merchandiser: |
| Do Not remove the |
| sure it is hanging properly for display in the store. |
9