Burner Fuel-
Control Valves
Side Burner
Control Valve
Valve | Fuel Supply | |
Orifice | ||
Hose | ||
|
Type 1 Fuel
Regulator
The L.P. Fuel Supply System
(the fuel regulator and hose)
FUEL REGULATOR AND HOSES
The fuel regulator supplied is equipped with a Type 1 coupling nut. Do not attempt to connect to any other L.P. cylinder not equipped with a mating Type 1 cylinder valve. This grill is not to be used with any other cylinder connection device.
The fuel regulator and hose assembly with the Type 1 fitting supplied must be used with the appliance. Do not use a hose and regulator assembly other than the one supplied with the grill or a manufacturer’s replacement fuel pressure regulator assembly.
The Type 1 connection system has the following features:
1.The system will not allow gas to flow until a positive connection has been made.
2.The system has a thermal element that will shut off the flow of gas between 240°F and 300°F.
3.The system has a
4.The pressure regulator and hose assembly provided is factory set at an outlet pressure of 11 inches water column (.4 lb. per sq. Inch).
WARNING: Any attempt to adjust the regulator is dangerous and could create a situation causing personal injury or property damage. Consult your L.P. gas dealer if you think the regulator is not working properly.
L.P. GAS SUPPLY CYLINDER
L.P. Cylinders can be obtained at the store where you purchased your grill or from an authorized L.P. gas dealer.
Cylinder Control
Valve
L.P. Gas
Cylinder
NOTE:
Stainless
Series Grills
DO NOT
include an
L.P. Gas
Cylinder
The L.P. Fuel Supply System
(L.P. gas cylinder)
L.P. GAS CYLINDER SPECIFICATIONS
Any L.P.
6
