Vermont Casting Gas Grill Locate These Parts, Phillips head screwdriver, Use Hardware Pack C

Assembly Step 4 - Attach the Grill Head to the Pillar

Tools Needed:

Phillips head screwdriver

USE HARDWARE PACK C :

Lock

Washer (7)

M6x1x16mm	Flat
	Washer (7)
Bolt (7)

LOCATE THESE PARTS:

Grill Head

Assembly

Back Side of the Assembly

1.Set the Grill Head Assembly onto the top of the assembled Pillar and Base as shown. Ensure that the hose and regulator hanging from the bottom of the Grill Head are on the inside of the Pillar.

2.For each pre-threaded mounting hole, loosely insert a bolt, washer, and lock washer. To make assembly easier, start with the center mounting hole of the front pillar panel and work around to the sides.

3.After all of the fasteners have been loosely placed, firmly tighten the bolts.

13