Removal and Replacement Procedures
5.2 Disassembly Sequence Chart
Use the chart below to determine the section number to be referenced when removing computer components.
Disassembly Sequence Chart
Section | Description | # of Screws Removed |
5.3Preparing the Expansion Base for Disassembly
5.4Installing an Optional Hard Drive
Hard drive carrier | 1 |
Hard drive rear panel | 2 |
Hard drive | 4 |
|
|
5.3Preparing the Expansion Base for Disassembly
Perform the following steps before disassembling the expansion base:
1.If the computer is in the expansion base, turn off the computer and disconnect the expansion cable from the computer.
2.Remove the computer from the expansion base.
3.Disconnect the AC adapter and all external devices from the expansion base.
Maintenance and Service Guide |
