HP Docking Station XB3000 manual Troubleshooting, Before Replacing Parts

2

Troubleshooting

ÅWARNING: Only authorized technicians trained by HP should repair this equipment. All troubleshooting and repair procedures are detailed to allow only subassembly-/module-level repair. Because of the complexity of the individual boards and subassemblies, do not attempt to make repairs at the component level or modifications to any printed wiring board. Improper repairs can create a safety hazard. Any indication of component replacement or printed wiring board modification may void any warranty or exchange allowances.

This chapter contains troubleshooting information for the expansion base. Carefully match the symptoms of the malfunction against the problem description in the troubleshooting tables to avoid a misdiagnosis. Refer to Chapter 5 for all removal and replacement procedures.

Follow these guidelines when troubleshooting:

■Complete the recommended actions in the order in which they are given.

■When the problem is resolved, do not complete the remaining troubleshooting steps.

2.1Before Replacing Parts

When troubleshooting a problem, check the following list for possible solutions before replacing parts:

■Be sure that cables are connected properly to the suspected defective part.

■Be sure that all required device drivers are installed on the computer.

Maintenance and Service Guide 2–1