
12.Position one of the blade assemblies onto the motor hub and secure blade assembly using two
BLADE
ASSEMBLY
Figure 8
13.Slide the coupler cover over the downrod and position it to cover the motor coupling (Figure 9).
14.Position the ceiling cover over the downrod. Be sure the cover is oriented correctly, with the large opening at the top (Figure 9).
DOWNROD | CEILING | |
COVER | ||
|
COUPLING COVER
Figure 9
WARNING
It is critical that the pin in the hanger ball is properly installed and the setscrews securely tightened. Failure to verify that the pin and setscrews are properly installed could result in the fan falling.
15.Reinstall the hanger ball on the downrod (Figure 10) as follows. Route the motor leads through the hanger ball and slide the hanger ball over the downrod. Install the pin through the holes at the top of the downrod and slide the hanger ball up the downrod, aligning the ball so the pin in cap- tured in the groove in the top of the hanger ball. Pull the hanger ball up tight against the pin and securely tighten the setscrew in the hanger ball. A loose setscrew could create fan wobble.
16.The fan comes with blue, black and white leads that are
PIN
HANGER BALL
DOWNROD
SETSCREW
Figure 10
17.You have now completed the assembly of your new ceiling fan. You can now proceed with hang- ing and wiring your fan.
6