Sansui HDLCDVD325 owner manual Preparation/Status display of disc

To make the again.

Audio CD

Disc operation

DVD

Play status

Preparation/Status display of disc

The following pages describe the setup/operation in DVD mode.

NOTE:

If the unit does not operate properly: Static electricity, etc., may affect the play- er's operation. Disconnect the AC power cord once, then connect it again.

38

Preparation

Before DVD/CD operation, please make preparations as follows.

1 Insert the AC cord plug into a standard 120V 60Hz polarized AC outlet.

•If the AC cord plug is plugged in for the first time, wait for about 5 seconds before pressing POWER.

NOTE: When connecting to other equipment, unplug the unit from the AC outlet.

2 Press POWER on the unit or on the remote control to turn on the unit. The POWER indicator will light.

•Every time you press POWER, the TV/DVD starts from TV mode.

•When using an amplifier, switch on the amplifier.

3 Press TV/DVD to select DVD No Disc mode.

The DVD startup screen will ap- pear on the screen.

Status display of disc00:03:1301:30:32

Press DISPLAY twice. The status display of the disc will appear on the screen.

Title elapsed playing time

Title total time

Chapter No

Title number T 1/21/1EngC 1/21/200:03:13FraD01:30:321/1

Subtitle language Type of audio

Camera angle

Audio language

Display Off

status display screen34:56disappear,71:33 press DISPLAY

Track elapsed playing time

Track total time

Track number T 11/99

•When you play a CD disc, the status display will appear and remain on the screen.