Sansui HDLCDVD325 Using the Wowtm surround sound feature, Selecting the Hdmi audio input source

Select STEREO mode (see “Selecting stereo/Second Audio Program (SAP)” on page 34).

Using the WOWTM surround sound feature/Selecting the HDMI audio input source/Selecting the digital output

Notes:

•If the broadcast is monaural, the SRS 3D effect will not work.

•The audio out jacks do not output any of the WOW audio features.

WOW, SRS and symbol are trademarks of SRS Labs, Inc. WOW technology is incorporated under license from SRS Labs, Inc.

Using the WOWTM surround sound feature

WOW is a special combination of SRS Labs audio technologies that creates a thrilling surround sound experience with deep, rich bass from stereo sound sources. Your TV’s audio will sound fuller, richer, and wider. WOW consists of three features; SRS 3D, FOCUS, and TruBass.

1

2 Press SETUP/TV MENU in the TV mode, then press					or to
select	(AUDIO) menu.			AUDIO
Press ▲ or ▼ to select the					N/
3 desired WOW feature you want to
adjust.	Press	or	to turn on	WOWSRSFOCUS3D
SRS 3D:				HDMITruBass	OFFHDMI
	or off the surround			:SELECT	:ADJUST
	sound effect.
FOCUS:	Press	or	to turn on

or off the vocal emphasis effect.

TruBass: Press or to select the bass expansion effect high, low or off.

4 After your desired setting, press EXIT to return to the normal screen.

Selecting the HDMI audio input source

When you use HDMI AUDIO IN jacks with HDMI or DVI device, you must select HDMI audio input source from “HDMI” or “DVI”.

1 Press SETUP/TV MENU in the TV mode. Then press or to

select (AUDIO) menu.

2 Press ▲ or ▼ to select “HDMI”,			WOWAUDIOSRSFOCUS3D	OFF￿
then press	or	to select	HDMITruBass	/DVI
“HDMI” or “DVI”.
HDMI: When you connect the
			:SELECT	:ADJUST
HDMI device to the TV,
select this setting.
DVI: When you connect the
DVI device to the TV with analog
audio cords, select this setting.
3 Press EXIT to return to the normal screen.

Selecting the digital output

You can choose the format of the digital audio output signal.

1 Press SETUP/TV MENU, then press or to select (AUDIO) menu.

2 Press ▲ or ▼ to select “DIGITAL
OUTPUT”, then press or to	A U D I O
select “PCM” or “DOLBY	AUDIO LANGUAGE
DIGITAL”.	DIGITAL OUTPUT	PCM
	RESET	PCM / DOLBY DIGITAL
3 Press EXIT to return to the	: SELECT	: ADJUST
normal screen.

35