![](/images/new-backgrounds/1011125/111259x1.webp)
Intended use
Your Black & Decker steam mop has been designed for sanitising and cleaning sealed hardwood, sealed laminate, linoleum, vinyl, ceramic tile, stone and marble floors and for refreshing carpets. This appliance is intended for indoor household use only.
Warning! Read all of the 'Safety, Maintenance, Service' manual carefully before operating this appliance.
Read all of this manual carefully before operating the appliance.
Features
This appliance includes some or all of the following features.
1.ON/Off switch
2.Lock off button
3.Trigger switch
4.Steam nozzle
5.Hand held steam cleaner
6.AutoselectTM button
7.Filler cap
8.Water tank
9.Steam mop body
10.Handle
11.Steam head
12.Steam head cleaning pad
13.Resting mat
14.Carpet glider
15.Bottom cable tidy hook
16.Top cable tidy hook
17.Cable management clip
18.Jug
Accessories
This appliance includes some of the following accessories others are available to purchase from the Black & Decker website.
The performance of your appliance depends on the accessory used. Black & Decker accessories are engineered to high quality standards and designed to enhance the performance of your appliance. By using these accessories you will get the very best from your appliance.
(Original instructions) | ENGLISH |
Flexible hose and handle
For convenient use of all accessories.
Variable steam jet nozzle
For higher pressure steam bursts, twist to change the spray pattern of the steam burst.
Small brush (Blue)
For cleaning bathrooms.
Small brush (Yellow)
For cleaning kitchens.
Small brush (Green)
For cleaning toilets.
Small Squeegee
For cleaning glass doors and windows.
Warning! Do not use the window squeegee on cold glass. It may cause the glass to break.
Assembly
Warning! Before attempting any of the following operations, make sure that the appliance is switched off and unplugged and that the appliance is cold and does not contain any water.
Attaching the handle (Fig. A)
uSlide the bottom end of the handle (10) into the top end of the steam mop body (9) until it clicks into place. The arrow on the handle (10) should be aligned with the top of the steam mop body (9).
Attaching the steam head (Fig. B)
uSlide the bottom end of the steam mop body (9) onto the steam head (11) until it clicks into place.
uThe steam head can be removed from the Steam mop body by pressing the steam head release button (19) and pulling the steam mop body (9) off the steam head (11).
5